Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Quick Start
Instructions for Stand Setup
Step 1: After unpacking, using the original packing cushion, place the LCD monitor on a
flat surface.
Step 2: Pull the upper side of the stand.
Step 3: While avoiding the cables, pull the bottom side of the stand upward until it is
locked into position.
Step 4: While avoiding the cables, pull the upper side of the stand into the locked
position.
Step 5: Lift the LCD out of the packing cushion by the base into an upright and locked
position.
Step 6: Adjust the LCD monitor for preferred viewing angle. The working angle for the
hinge is 5 degrees forward and 20 degrees backward.
NOTE: Slowly adjust the LCD to avoid finger injury.
Step 1
CAUTION:
Avoid all cables
Step 4
CAUTION: Gently place
stand on surface to avoid
scratching or damage to
the base.
LCD15651765manual.p65
Step 2
Step 6
5°
3
3
Step 3
Step 5
5/27/03, 8:31 AM
Publicité
