Publicité
Les langues disponibles
Les langues disponibles
Usage
3
3.1 Intended use
This appliance is intended only for
household use; it is not suitable
for professional use. It is designed
for chopping and whisking small
amounts of solid food only.
3.2 Initial use
Clean the appliance parts before
initial use (see 4.1).
3.3 Blending and
chopping with the
blending shaft
1. Place the plastic container (3) on
the non-slip rubber base (5) on a
stable and flat surface.
2. Hold the blending shaft (6) from
its plastic part and place it onto
the fixed shaft found at the cen-
tre of the container.
3. Put the ingredient you want to
process into the plastic container
(3) (in small pieces).
4. Place the middle cover (2) on the
plastic container.
– Make sure that the tabs on the
middle cover are fully seated
on the plastic container.
10 / EN
WARNING: If the
lock tabs do not fully
A
seat on the plastic
container, the blades
may get damaged.
5. Place the motor unit (9) on the
middle cover (2) by rotating it
anti-clockwise.
6. Plug in the appliance.
7. Press the operating switch (11)
to blend or chop the ingredients.
– Press the operating switch for
1 to 2 seconds interruptedly.
The appliance has
two speed levels,
C
which are "slow" and
"fast", depending on
the pressing power.
8. When you are done with the ap-
pliance, unplug it and wait for
the blending shaft (2) to stop
completely.
9. Rotate the motor unit (9) clock-
wise and remove the middle
cover.
10. Remove the blending shaft (6)
from the plastic container by
holding it from its plastic part.
Hand Blender Set / User Manual
Publicité
