Belkin TuneFM Manuel De L'utilisateur page 7

Using the PRO Setting to Improve Performance
When you connect your iPod, your TuneFM will automatically detect the iPod model and
adjust the volume. Although the default volume setting will be ideal for most conditions, you
may be able to improve the audio performance of your TuneFM by using the PRO setting.
The PRO setting can make your music sound louder and fuller by decreasing the amount of
attenuation in the audio signal. Professional FM stations use dynamic compression to make
music louder and fuller while limiting distortion. You can use the three PRO settings on your
TuneFM to add dynamic compression to your audio:
Normal – No change to the audio. This setting works well
with all types of audio.
PRO 1 – Increases the average volume of the audio. This
setting works well with most types of music.
PRO 2 – Increases the average volume even further. This
setting works well with quieter music, but it may cause
distortion with louder music.
When you press the "PRO" button, your TuneFM will display the current PRO setting.
Pressing the "PRO" button again will change the setting to PRO1, PRO2, and PRO
as follows:
OFF
All manuals and user guides at all-guides.com
Using the PRO Setting to Improve Performances
– Increases the average volume and transmits
in mono (instead of stereo). This setting works well for
podcasts and audio books. It can also be used to improve
reception if you are not receiving a clear signal from your
TuneFM.
| EN-5