Ariston CLIMA MANAGER Instructions De Fonctionnement page 68

IT GB
Clima Manager wireless
Press the Menu button. Turn the knob and
select the "Remote control" menu; press
the confi rmation button. Turn the knob and
select:
- General settings
Press the confi rmation button, turn the knob
and select the parameter values to be di-
splayed:
Software version
Hardware version
Zone number
(note: the device must be addressed to
the zone in which it is installed). Press the
exit button to return to the previous screen.
- Set contrast
Press the confi rmation button and turn the
knob to change the display contrast value,
then press the confi rmation button. Press
the exit button to return to the previous
screen.
- Reset
Press the confi rmation button and turn the
knob to enable or disable the Clima Manager
reset procedure, then press the confi rmation
button. The reset procedure results in all the
timer settingbeing restored.
- Battery saving
Press the confi rmation button and turn the
knob to select one of the following options:
No (display permanently on)
Partly (display enters standby
mode at night)
Maximum (display standby).
Press the confi rmation button and turn the
knob to change the setting, then press the
confi rmation button again. Press the exit
button to return to the previous screen.
68
All manuals and user guides at all-guides.com
RemoCon
General
Set contrast lcd
Reset
Battery Saving
Service Code
Back
Set contrast lcd
selection
Enter