Publicité
Les langues disponibles
Les langues disponibles
rapid selection buttons
The button used to set the domestic hot
water and heating temperature can be
used to set the temperature of the domestic
hot water and heating system as desired, to
any fi gure between the minimum and maxi-
mum values.
Press the button and turn the knob to select
one of the following options:
- set domestic hot water temperature
- set heating temperature (press the confi r-
mation button and turn the knob to set the
value, then press the confi rmation button
again) Press the exit button to return to the
previous screen.
Note: when the function is active, the heat-
ing system temperature cannot be set.
The heating mode button can be used to
select the heating operation mode.
Press the button and turn the knob to select
one of the following modes:
-
Automatic
schedule programming enabled
-
Normal (
)
schedule programming not enabled,
heating operating using daytime tem-
perature
-
Reduced (
)
schedule programming not enabled,
heating operating using night-time tem-
perature
-
Off (
) anti-freeze enabled
Press the confi rmation button.
Man/Timer
The Man/Timer button can be used to se-
lect manual operation by disabling the heat-
ing schedule programming function.
All manuals and user guides at all-guides.com
Set
room temperature
The multi-functional knob can be used to
adjust the set room temperature value.
Turn the knob and set the desired value.
Once the procedure is complete, after a few
moments the display will automatically re-
turn to the previous screen.
If schedule programming is enabled, the
room temperature modifi cation is only tem-
porary.
domestic hot water comfort
The comfort button can be used to an-
ticipate hot water usage, maintaining the
secondary heat exchanger at a suitable tem-
perature.
Press the button and turn the knob to select
one of the following options:
-
-
-
Press the confi rmation button.
reset
By pressing reset, it is possible to free the Cli-
ma Manager from any malfunctions which
have occurrred.
switching the boiler off
Press the mode button, turn the knob and
select OFF, then press the confi rmation but-
ton. After a few moments the display will
show the current time.
To switch the boiler back on, press the on
button, turn the knob abd select the boiler
operaing mode; press the confi rmation but-
ton. The display will show the selected set-
tings.
Disabled
Timed
Always enabled
IT GB
49
Publicité
