Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
TEMP Button
: Push this button to decrease the indoor
1
o
temperature setting in 1 F increments to 62 F.
TEMP Button
: Push this button to increase the indoor
2
o
temperature setting in 1 F increments to 86 F.
NOTE: Press and hold
and
buttons together for 3 seconds will
alternate the temperature display between the C & F scale.
MODE Selection Button: Each time the button is pressed,
3
the operation mode is shifted in the direction of the arrow:
AUTO
COOL
DRY
NOTE Please do not select HEAT mode if the machine you
purchased is cooling only type. Heat mode is not supported by
the cooling only appliance.
4
SWING Button: Push this switch button to activate auto
swing feature of the horizontal louver. Push it again to stop.
FP Button: During the heating operation(only when the
5
setting mode is HEAT), press this button and the unit will
operate at high fan speed with the temperature automatically
O
O
set to 8 C/46 F. The display window of indoor unit will display
FP . Press the buttons of ON/OFF, MODE, FAN SPEED,
TEMP UP/DOWN, TIMER ON/OFF, SLEEP or FP while
operating will cancel the FP function.
AIR DIRECTION Button: Used to change the louver
6
movement and set the desired up/down air flow direction.
O
The louver changes 6 in angle for each press.
RESET Button: When you press the recessed RESET button,
7
all current settings are cancelled and the control will return to
the initial settings.
8
FAN SPEED Button: Used to select the Fan Speed in four steps-
AUTO LOW
MED or HIGH. Each time the button is pressed,
the fan speed mode is shifted.
ON/OFF Button: Push this button to start operation, push
9
the button again to stop operation.
TIMER ON Button: Press this button to initiate the auto-on time
10
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10h, each
press will increase the auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust the auto-on time
to 0.0.
SLEEP Button: Press this button to go into the Energy-Saving
11
operation mode. Press it again to cancel. This function is only
can be used on COOL, HEAT and AUTO mode and maintain the
most comfortable temperature for you.
NOTE: While the unit is running under SLEEP operation mode, it would
be canceled if you press the MODE,FAN SPEED or ON/OFF button.
2
TIMER OFF Button: Press this button to initiate the auto-off time
12
O
sequence. Each press will increase the auto-timed setting in 30
minutes increments. When the setting time displays 10h, each
press will increase the auto-timed setting 60 minutes increments.
O
To cancel the auto-timed program, simply adjust the auto-off time
to 0.0
O
O
LOCK Button: When you press the recessed LOCK button, all
13
current settings are locked in and the remote controller does not
accept any operation except that of the LOCK. Press again to
HEAT
FAN
cancel the LOCK mode.
14
TURBO Button: Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temperature at cooling or
heating operation in the shortest time(if the indoor unit has no
this function, there is no corresponding operation happened
when press Turbo button.)
15
LED DISPLAY Button: Press this button to clear the digit
display in the air conditioner, press it again to illuminate (Not
available for the units without LED display window).
Indicators on Display Panel
DISPLAY area
TRANSMI-
SSION Indicator
OPERATION
MODE Indicator
LOCK Indicator
DISPLAY Indicator
DIGITAL DISPLAY area: This area will show the set temperature
1
and, if in the TIMER mode, will show the ON and OFF settings of
the TIMER. If in the FAN mode, nothing is appeared.
TRANSMISSION Indicator: This indicator flashes one time
2
when remote controller transmits signals to the indoor unit.
Display Panel
DIGITAL
1
2
4
5
TIMER ON OFF
TIMER
6
Fig. 2
3
3
ON/OFF Indicator
OPERATION
4
MODE Indicator
7
FAN SPEED Indicator
Publicité
