Rockford Fosgate Tweeter FNQ4401X Instructions D'installation page 7

3. Remove the ring. Drill the holes for the screws using a 1/8" drill bit.
4. Route the wire through the mounting hole cut-out.
5. Attach the wires. Observe proper speaker polarity.
6. Place the mounting ring over the speaker.
7. Place the speaker into the hole and screw the speaker into place.
8. Press the speaker grille into the mounting ring.
Screw
Grille
One Channel
From Source
or Amplifier
All manuals and user guides at all-guides.com
Mounting Ring
Use this when installing Mid Bass or 3-Way
A
B
C
Mid Bass
I
NSTALLATION
Mounting Hole,
Cut-Out
Speaker
Example of speaker installation
Tweeter
Mids
-S
PEAKERS
7