Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Guide No. Table (ISO 100)
Zoom
position
FULL
24mm
20
28mm
22
35mm
24
50mm
26
70mm
28
85mm
29
105mm
30
* All values given at ISO100. For values at ISO200 multiply by 1.4×; for
values at ISO400 multiply by 2×.
* When using slave flash, and with cameras other than Type R, the
zoom position is fixed at 24 mm.
Troubleshooting
The flash unit will not charge.
•
Check the polarity of the batteries. If a battery was inserted in
the wrong direction, insert it in the correct direction.
•
Check whether the batteries are empty. In such case, replace
with new batteries.
The flash unit will not fire.
•
Check whether the flash unit is correctly attached to the
camera. Insert the flash unit all the way into the hot shoe and
tightly close the lock ring.
•
If the hot shoe contacts are dirty, wipe them clean with a soft,
dry cloth.
•
If the flash was powered off automatically by the Auto Power
Off function, turn on the flash unit again.
The picture is over- or underexposed.
•
Check the flash mode. If it is set to Manual flash, set it to TTL
mode.
Flash output level
1/2
1/4
1/8
14
10
7
16
11
8
17
12
8
18
13
9
20
14
10
21
15
10
21
15
11
EN -
1/16
1/32
1/64
5
4
3
6
4
3
6
4
3
7
5
3
7
5
4
7
5
4
8
5
4
Publicité
