A.
1
NOTE: These faucets are designed to fit a maximum countertop thickness of 1". Thick tile
kit available as RP37776 increases thickness to 2 1/4".
a Stainless Steel or a thin sink use RP37490 Stablization Plate SUPPLIED WITH FAUCET.
SHUT OFF WATER SUPPLIES.
Set spout assembly on sink making sure
A.
that gasket (1) is properly aligned in cavity
of base (2).
All manuals and user guides at all-guides.com
B.
*
If you are installing the faucet on
A.
2
Install Valve Assembly
Slide the base then gasket (1) up over
A.
tubes of valve assembly. Feed tubes down
through hole in sink making sure that the
gasket is properly aligned in cavity of base.
OPTION: If sink is uneven, use silicone
sealant under the gasket.
1