auna multimedia AI-01 Mode D'emploi page 11

Monitoring
Gain Adjustment:
All manuals and user guides at all-guides.com
Nutzungshinweise
The headphone jack provides direct monitoring of the mic signal while re-
cording, without any delays that usually occur when using the computer's
headphone output for live monitoring.
Note: Turn VOLUME down before plugging in youre headphones.
You can also monitor previously recorded tracks while recording a new
track. Adjust the MONITOR thumb slider to balance levels of pre-recorded
and live audio.
Note: Be sure to have monitoring in your software turned off for the active
track.
For maximum audio quality, set the MIC GAIN as high as possible. The Clip-
ping/Peak LED should remain a steady green while recording, flickering
yellow at the highest sound volumes.
Lower the MIC GAIN, if the peak level LED shows red at any time during a
performance.
11