Publicité
Les langues disponibles
Les langues disponibles
XLR jack
1
2
Clipping/Peak LED (green = signal; yellow = peak; red = clipping)
MIC GAIN: Adjusts mic input level before the AD conversion
3
Headphone jack for zero-latency direct monitoring
4
VOLUME: Adjusts headphone volume
5
MONITOR: Blends pre-recorded playback track from computer with live signal from the micro-
6
phone
+48V: Phantom power switch for condenser microphones.
7
Blue phantom power indicator LED
8
USB-LED: lights green when properly connected to a powered computer USB port
9
USB connector: Digital audio interface
10
XLR Connection
Connect to a microphone directly, or use an XLR cable and secure the adapter to a microphone stand using
the supplied straps.
USB Connection
Connect to a powered USB port us-
ing a standard cable (supplied).
The green USB LED should light up
and the plug and play driver will in-
stall automatically.
You are then ready to record with
your favourite audio software.
Note: Make sure you use an active
and powered USB port.
10
All manuals and user guides at all-guides.com
Connections
Publicité
