Vivitek VIVOTEK FE9182-H Guide D'installation Rapide page 8

4
Network Deployment
General Connection (without PoE)
1. Connect RJ45 Ethernet cable to a switch.
2. Connect the power cable from the Network Camera to a power outlet.
3. If you have external devices such as sensors and alarms, make the connection from the general
I/O terminal block.
IMPORTANT:
1. When IR lights are on in the night, the total power consumption is 23W.
2. If DC power is preferred, it should comply with: O/P: 12VDC, 2A min., L.P.S. per IEC 60950-1.
All manuals and user guides at all-guides.com
3
General I/O Terminal Block
Power Cord Socket (Black)
Microphone In (Pink)
Audio Out (Green)
EN - 7
1
+5V: Power, 5V DC
+5V
DO: Digital Output
DO
D I: Digital Input
D1
GND: Ground
GND
2