IVT JS-570SGP Mode D'emploi page 6

Instruction manual
TOOL SPECIFICATIONS
EN
Voltage ~ Frequency [V ~ Hz]
Rated power [W]
Stroke rate at no load [SPM]
Cutting ability in wood [mm]
Cutting ability in aluminium [mm]
Cutting ability in steel [mm]
Vibration level [m/s
Sound pressure level [dB(A)]
Sound power level [dB(A)]
Weight [Kg]
Safety class
PART LIST
1. On / Off switch
2. Lock-on button
3. Front guard
4. Saw blade
5. Guide roller
6. Base plate
7. Ventilation slots
8. Hex key
9. Lever for pendulum stroke adjustment
10. Thumbwheel for stroke rate selection
CONTENT OF THE BOX
Instruction manual (1 pc), saw blade (1 pc), hex key (1
pc).
INTENDED USE
This tool is intended for sawing wood, plastic and
aluminum materials. Thanks to the wide range of
accessories and saw blades available as optional extra,
this machine can be used for many applications and it
enables also to obtain curved or circular cuts.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user's manual and all other literature supplied
All manuals and user guides at all-guides.com
Model
]
2
JS-570SGP
230 ~ 50
800 - 3000
WOOD: 7.6 (K=1.5)
STEEL: 11.8 (K=1.5)
85 (K=3)
96 (K=3)
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙ The tool must be assembled correctly before use.
∙
Only use the tool for its designed purposes.
∙ On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙ Never leave the tool unattended.
∙
Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙
Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
is in use.
∙ The user is responsible for third parties while
working with the tool.
∙
People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
6
570
65
10
8
2.1
II