EisSound KBSound iSelect Manuel De L'usager page 6

4
2. General Operating Notes
1.- None of the functions (except ON/OFF) work unless the remote control is in "on" mode.
2.- Once the
® iSelect
KBSOUND
the OFF state (as indicated in this manual) really means a "standby" state.
3.- A short BEEP sound signal indicates that the data has been received
4.- The remote control unit exchanges information (transmits and receives data) by
means of the transmission-reception capsule. If at any time there is a failure in the
communication, the screen will display the
occurring, point the remote control to the transmission-reception capsule at a straight-
line distance of no greater than 5 meters.
5.- The remote control display will automatically turn off when
there has been no keying activity for more than a few seconds,
ensuring more efficient battery usage. To view the display
information at any time, point the remote control to the
transmission-reception capsule and press the
All manuals and user guides at all-guides.com
is connected to the mains, it will remain powered even it is in OFF state. That means that
symbol. In the event of this
key.
beep
5m
The will
® iSelect
KBSOUND
turn on with the audio and
station frequency settings
saved as "ideal" mode
settings (see chapters 3 and
6) when the unit is
connected to a power
supply.
When switched off and on
while connected to the
power supply, the audio and
station frequency settings
will be as when the unit was
switched off with the remote
control ON/OFF key