Publicité
Les langues disponibles
Les langues disponibles
3
3
3
10
9
8
9
Use 50 x 10 rubber pad (13),
10mm ID washer (12) and konb
Use 50 x 10 rubber pad (16), 10mm ID
(11) to attach heater to foot
washer (15) and knob (14) to attach
stand. Tighten knobs.
heater to foot stand. Tighten knobs.
Insert M6 x 55 screw (11), 6mm ID washer (12) and M6 x 20
nut (13) to footstand.
Connect the electrical power supply cable to the wiring
compartment. (See wiring instructions).
Attach connectors to the appropriate conductor and ground
wiring. After completing the connections, arrange pigtail unit
leads and power supply wires in wiring compartment.
All manuals and user guides at all-guides.com
Electric Blower Heater
Use M8 x 80 screw (10), 8mm ID
10
washer (9), and M8 nut (8) to attach
handle to foot stand. Tighten.
9
9
8
Use M8 x 80 screw (10), 8mm ID
washer (9), and M8 nut (8) to attach
handle to foot stand. Tighten.
5
6
User's Manual
4
4
Publicité
