Speed link SL-6199 Mode D'emploi page 25

Problem Solving
Do I need a driver?
No. Presenter Professional will work as soon as
you have plugged in the receiver.
Do I need to configure the receiver on the
device?
No. The functions will be active as soon as you
have plugged in the receiver.
Can I use multiple Presenters in the same
room at the same time?
Yes. You should pair the receiver to the device in
order to do this. To do that, press the ID button
on the receiver and then the Link button.
The laser doesn't work.
• Make sure you are in PowerPoint® mode.
• Try and switch on the laser as described
above.
• If needed, change the batteries.
The remote control doesn't respond.
• Make sure that the Presenter is in Power-
Point® mode. The mouse pointer is not
activated in multimedia mode.
• Pair the receiver to the Presenter. To do
that, press the ID button on the receiver and
then the Link button.
• If needed, change the batteries.
2
D
GB
F
E
I