Tripp-Lite B110-SP-CAT-OD Manuel De L'utilisateur page 6

All manuals and user guides at all-guides.com
Equipment (Edge) Protection Only
This installation protects only your edge equipment from
surge, lightning or ESD damage. To protect both the source
and edge equipment, refer to section Source and Equipment
(Edge) Protection.
Note: Use standard size Cat5e, Cat6 or Cat6a cables that feature a
wire gauge of 23/24 AWG. Slim category cables are not supported.
1. Remove both the cap
Note: Use standard size Cat5e, Cat6 or Cat6a cabling that features
a wire gauge of 23/24 AWG. Slim category cables are not supported.
19-11-220-933B57-BOOK.indb 5 19-11-220-933B57-BOOK.indb 5
Installation
metric cable glands (refer to section Metric Cable Gland
Assembly). Slide the cap and remaining portion of the
metric cable gland onto both the included grounding wire
and bare-wire category cable coming from your source (ex:
PoE switch) as shown:
A E
and end nut
5
PoE Camera
from one of the
2/5/2020 1:28:51 PM 2/5/2020 1:28:51 PM