Publicité
Les langues disponibles
Les langues disponibles
SIMPLE INSTALLATION
Step 1:Dryer should be placed in a ventilated area with
not less than 10cm distance from the wall. If placed in a
room such as bathe room, it is suggested there are no
obstacles within 1.5m in front of dryer and keep ventilated.
Step 2:The horizontal adjustment:
Tie a heavy subject on the string on the front and two sides of the dryer.
Please refer this to below figure, and if A=A, B=B, this means the dryer
is placed horizontally. While the opposite, you could place something on
the grounding.
Notice:
if dryer could not be placed horizontally (the
lean angle is no more than 2), the dryer will
work unbalanced or stop working sometimes.
36
SIMPLE INSTALLATION
Notice when installing:
• Do not install the dryer in the open air or place easily damaged by rain;
• Do not place the back of dryer near curtain or something in the wind;
• Do not place the dryer near gas or flammable area.
Step 3:Regarding the fixing of flex tube:
• Connect one side of flex tube with whorl to the back
vent, then fix it deasilly till tight.
• The other end of flex tube will be extended to outdoor, please
refer the right assemble way to the below pictures.
Level Adjusting
Once in its permanent operating position,
check that the dryer is absolutely level with the aid
of a spirit level. If it is not, adjust the feet with a tool.
37
Publicité
