Beper VE.500 Mode D'emploi page 13

All manuals and user guides at all-guides.com
EN
Mist Fan Use instructions
REMOTE CONTROL FUNCTION
Plug the supply cord to the socket.
The red light illuminates.
To use the remote control, remove the cover and insert 2 AAA batteries (not included) respecting the
polarity. Close the cover.
Press ON/SPEED to activate the blades (the red light NORMAL illuminate) and choose speed (the
red light DOWN illuminate) ; pressing many times ON/SPEED allow to select the air-flow speed (for
each touch the red light illuminate and indicate MEDIUM and HIGH).
Press SWING to activate swing fan (the red light SWING illuminate). Press another time to switch
off the swing (the red light SWING switch off).
Press MIST to activate the water mist (the blue light MIST switch on). Switch ON/OFF on position
I (the green light on the mist button, switch on) and choose the intensity of the water mist (MIN &
MAX).
!!IMPORTANT!!: the water tank have to be full before starting with MIST.
After using the appliance, regulate the fan on MIN, choose position 0 with the switch ON/OFF and
press MIST (the blue light switch off).
NORMAL, the blades continuously turn
NATURE or BREEZE, the blades turn with alternative movement
Press TIMER (when the fan is working) to program the timer to switch off the appliance (the red light
illuminate). Pressing the TIMER button you can choose program max. until 7hours30, each time you
press the button will set + 30 minutes an the red lights illuminate.
Press OFF to stop the airflow, the red light POWER still lights, it will completely stops only when
unplug the appliance.
HEAD INCLINATION
It is possible to choose various positions and change the air flow swing.
Before changing it, switch off the fan.
Take the motor body, unscrew the regulation axis and change the inclination of the fan as desired
and screw the air strongly.
Attention : do not try to force the inclination position in order to avoid any failure.
CLEANING
Before cleaning, switch off and unplug the fan.
For cleaning use a soft cloth, that may be softly wet.
Do not use alcohol or chemical substances, or any detergent that could damaged this appliance.
Do not spray water or other liquids on the fan in order to protect it.
After cleaning, dry every parts before using the appliance.
13