Publicité
Les langues disponibles
Les langues disponibles
Gerafold 218 Errors
When a paper jam occurs in the folder, the touchscreen displays the error codes
and enable the operator to clean paper path:
Icon Legend :
Video button : Press icon to see how to remove jam tutorial, exit by
pressing Home icon
Downward button: Motor purge copy out of front fold pocket
Upward button: Motor purge copy out of rear fold pocket
Reset button: Reset the folder Logic
Error 01
Copy length too short <410mm
Pull copy and reset. Feed copy longer of 410mm
Error 2: Front or rear Folder Pocket Sensor covered by
paper. Clean folder pockets by pulling copy from exit or do
the Automatic Eject Procedure.
Error 3: Feed Error, copy lead edge damaged or curled up
Error 03
does not allow the paper entry. Pull back copy and reset.
Error detected at folder power on codes
Rear pocket sensor C3 covered by paper, remove
Error 04
paper from the rear fold pocket and press reset.
Error 04
Mar .2018
All manuals and user guides at all-guides.com
Error 05
paper, remove paper from the front fold pocket and
Error 06
last panel S1 sensor is covered by paper Pull
Error 07
copy back, clear paper path and press reset.
Error 08
Error 09
Last panel S3,S4 ,S5 sensors are covered by
paper. Remove paper under the sensors and reset.
Error 10
Sometime there might be a jam not detected by the
folder, in this case use the
How to find this option :
means front pocket sensor C2 covered by
press reset.
Error 06
Fan/Cross selection S2 sensor is covered by
paper . Pull copy back, clear paper path and press reset
start S0 sensor is covered
Error 08
by paper. Pull copy back, clear paper path and press
reset.
Error 10
paper is not completely out of folder pockets or
S0 sensor was uncovered during fold process.
Refer to step
(First Folding Procedure (Fan Fold))
Press arrow button to clear paper path and press reset
function.
"Clean"
GeraFold User Manual 22
Error 05
Error 07
Error 09
Clean
Publicité
