Publicité
If you have Windows 2000:
Step 5: Update the driver from the Installation CD-ROM
Click Windows Start, Settings, and Control Panel. Double-click System, click the Hardware
tab, and click the Device Manager button. Click to expand Modems, and double-click
Standard Modem. Click the Driver tab and click the Update Driver button. When the
Upgrade Device Driver window appears, click Next. Select Search for a suitable driver for
my device (recommended) and click Next. Select CD-ROM drives, click Next, and then click
Next again. A Digital Signature Not Found warning may appear*. If it does, click Yes. Click
Finish to complete the installation.
If you have Windows XP:
Step 5: Install the modem drivers
Turn on your computer. After the New Hardware Wizard detects your modem, insert the
Installation CD-ROM into your CD-ROM drive. Wait while the Wizard searches. Select U.S.
Robotics 56K FAX EXT and click Next. A Windows Logo testing message will appear*. Click
Continue Anyway
Continue Anyway
Continue Anyway. Click Finish
Continue Anyway
Continue Anyway
* U.S. Robotics has thoroughly tested in conjunction with the supported hardware and has verified compatibility with
Windows 2000/XP.
All Windows Operating Systems:
Step 6: Install the communications software.
Eject and reinsert the Installation CD into the CD-ROM drive. An interface will appear that
will enable you to install Internet Call Notification, and Phonetools/Winphone software
and view the User Guide for your modem. (If the interface does not appear automatically,
click Windows Start
Start
Start and then click Run
Start
Start
CD-ROM drive uses a different letter, type that letter in place of "D").
T T T T T roubleshooting
roubleshooting
roubleshooting
roubleshooting
roubleshooting
If you have any difficulty with your modem, first make sur
If you have any difficulty with your modem, first make sur
If you have any difficulty with your modem, first make sure that it was
If you have any difficulty with your modem, first make sur
If you have any difficulty with your modem, first make sur
installed corr
installed correctly.
installed corr
installed corr
installed corr
ectly.
ectly.
ectly.
ectly.
Windows 95/98/Me: Click Windows S S S S S tart
click the Modems
Modems
Modems
Modems icon. In the Modems Properties screen, you should see a descrip-
Modems
tion for your modem. Click the Diagnostics
highlighted. Click the Mor
responses from the modem. This means that the installation was a success. If your
modem is not listed and/or you do not see a series of commands and responses,
check that all connectors and power cables are properly connected to your modem
and the back of your computer. Check that the modem is switched on and the CS or
PWR light is illuminated. Shut down and restart your PC. Check your modem again
using the Control Panel as described above.
Windows NT: Click Windows S S S S S tart
Modems
Modems
Modems icon. In the Modems Properties screen, you should see a description for
Modems
Modems
your modem.
Windows 2000/XP: Click Windows S S S S S tart
P P P P P anel
anel
anel
anel. Double-click the Phone and Modem Options
anel
Make sure that the correct modem is highlighted. Click the P P P P P roperties
the Diagnostics
Diagnostics
Diagnostics
Diagnostics
Diagnostics tab. Click the Query Modem
commands and responses from the modem. This means that the installation was a
6 6 6 6 6
All manuals and user guides at all-guides.com
Finish
Finish
Finish to complete the installation.
Finish
Run
Run. In the Run dialog box, type D:\setup.exe
Run
Run
tart
tart
tart, Settings
tart
Diagnostics
Diagnostics
Diagnostics tab. Make sure that the correct modem is
Diagnostics
Mor
More Info
Mor
e Info button. You should see a series of commands and
e Info
e Info
Mor
e Info
tart
tart
tart
tart, Settings
Settings
Settings
Settings, and then Control P
Settings
tart
tart
tart, Settings
tart
Settings
Settings
Settings (if applicable), and then Control
Settings
Phone and Modem Options
Phone and Modem Options
Phone and Modem Options
Phone and Modem Options icon. Click the Modems
Query Modem button. You should see a series of
Query Modem
Query Modem
Query Modem
D:\setup.exe
D:\setup.exe
D:\setup.exe. If your
D:\setup.exe
Settings, and then Control P
Settings
Settings
Control P
Control Panel
Control P
Settings
Control P
Control P
Control P
Control P
Control Panel
anel
anel
anel. Double-click the
anel
roperties button. Click
roperties
roperties
roperties
e that it was
e that it was
e that it was
e that it was
anel. Double-
anel
anel
anel
Control
Control
Control
Control
Modems tab.
Modems
Modems
Modems
Publicité
