Tripp-Lite SmartOnline SUINT1000XL Guide De L'utilisateur page 4

Optional Installation
The connections are optional. Your UPS will function properly
without these connections.
Serial Port Connection
1
Using the serial cable provided, connect the
serial port on your computer to the serial port
of your UPS. Install on your computer the
PowerAlert UPS monitoring software pro-
gram (included on CD-ROM) appropriate for
your operating system. See Communications
in the Basic Operation section of this manual
to determine how to monitor and manage your
UPS using this port.
External Battery Pack Connection
2
Check to ensure that the external batteries you
are connecting match the voltage listed on
your UPS's battery connector. Plug either end
of the battery connection cable (supplied with
the battery pack) into the UPS's External
Battery Connector and the other end into the
Battery Output Connector on the rear panel of
the external battery pack. Since your UPS has
internal batteries, external batteries are only
needed to extend runtime. Adding external
batteries will increase recharge time as well as
runtime. Make sure that each end of the cable is
fully inserted into its connector. Several small
sparks may result during battery connection;
this is normal.
Get user manuals: See SafeManuals.com
1
SUINT2000XL shown
2
4
SUINT2000XL shown
SU1000T shown