Winplus TypeS BT56883 Mode D'emploi page 6

All manuals and user guides at all-guides.com
1. Frequency: 2.4GHz
2. Operating Voltage: DC 12V / 24V
3. Operating Temperature: -10~+50°C
4. Maximum Signal Range: 33 feet/10 meters
(without Interference or Obstruction)
5. Camera Lens Water Resistance: IP67 rating
6. Battery capacity: 1500mAh
7. Battery usage time: 4.5 hours
DASH MONITOR INSTALLATION
1. Stick the Suction Cup Mount on the windshield and adjust to your desired position.
2. Hook the Dash Monitor on to the windshield mount.
3. Remove the Type S Dash Monitor protective overlay.
4. Now power the monitor:
a. 12V/24V Power Adapter
Take the 12V/24V Power Adapter and plug adapter into the right side of the Type S Dash
Monitor. Plug the other end into 12V/24V power port in your car.
b. Hard wire
Take the Hard Wire Power Adapter and plug adapter into the right side of the Type S
Dash Monitor. Run cable to fuse box and connect to fused accessory power source.
Refer to your vehicle owner manual for location of available accessory fuses.
5. At this time, the Type S Dash Monitor is ready to be automatically powered on when the vehicle
engine starts.
Warning: Many vehicles provide constant power to the 12V/24V outlet. If your outlet provides
constant power, please remember to unplug the monitor when not in use to avoid draining the vehicle
battery.
3. PRODUCT SPECIFICATIONS
4. INSTALLATION GUIDE
3