Taurus Cairo Slim 650 Instructions D'installation page 22

Programming
A day (24 hours) has been divided
equally into segments, represented
on the screen by small time fractions.
Selecting an operating mode for
each hour will represent a day of
programming.
Each hour has a set temperature
assigned to it - the ones marked with
a double bar represent comfort mode,
with a single bar representing eco-
nomy mode. The empty hours keep
the set temperature for defrost mode.
Comfort Mode
Economic Mode
Anti frost mode
- To set the weekly programming,
press the programming button for a
few seconds.
- The digits of the time will appear
in the screen. Use the "+" and " – "
buttons to go forward or back until
the clock reaches the current time
and confirm by pressing the program-
ming button. Repeat the same steps
to adjust the minutes.
- Day 1 (Monday) will appear in the
screen. Use the "+" or "-" buttons
to access the day of the week you
wish to programme and confirm by
pressing the programming button.
The following message will appear in
the screen:
Manual Cairo Slim.indb 22
All manuals and user guides at all-guides.com
- The first time fraction will begin to
flash. Select the desired operating
mode and press the "+" button to go
on to the next time fraction.
Repeat the same step for the other
time fractions.
- Once all the intervals have been
set for the desired day, confirm by
pressing the programming button and
the programming will automatically
advance to the next day.
- Repeat the above steps to program-
me the other days of the week.
- To finalise the programming, press
the programming button.
CAUTION: During programming of the
appliance, the heating elements will
not work.
- When the appliance is operating
in programming mode and you wish
work in manual mode, press the
operation/standby button twice, then
press the programming button.
- To go back to working in program-
ming mode, press the programming
button.
Backlit screen
The appliance has a backlit LCD
screen to make it easier to use.
When the appliance is switched on,
pressing any button will light the
screen.
25/06/12 16:00