Viega PureFlow Serie Directives Du Produit

Product
Instructions
Viega PureFlow
Zero Lead ManaBloc
A
B
C
D
⅛"
to
C
¼"
D
C
Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar
with Viega products and their installation. Installation by non-professionals may void Viega LLC's warranty.
This document subject to updates. For the most current Viega technical literature please visit www.viega.us.
Viega LLC, 12303 Airport Way, Ste. 395 • Broomfield, CO 80021 • Ph: 800-976-9819 • Fax: 800-976-9817
PI-PF 521110 0518 PureFlow Crimp Supply Adapter (EN ES FR)
All manuals and user guides at all-guides.com
Crimp Supply Adapter
®
Supply Connection
®
B
1
B
3
5
The water supply to the ManaBloc shall be turned off before
attempting installation of crimp supply adapters.
CAUTION
CAUTION
1. Slide the supplied swivel nut (D) and a crimp ring (C)
onto the tubing (threads of the nut toward the end of
the tubing).
2. Insert the barbed end of the fitting (B) fully into the end
of the tubing as shown.
2
3. Slide the crimp ring (C) to within ⅛" to ¼" from the
end of tube. Crimp the ring with an appropriately sized
full-circle crimp tool. DO NOT CRIMP TWICE. Refer to
the current Viega PureFlow Water System Installation
Manual for additional crimping information.
4. Ensuring sealing element (A) is in place and clean of
any dirt or debris, wet sealing element with tap water.
Insert fitting (B) into desired supply port until the fitting
flange sets flush with the port.
5. Slide the swivel nut (D) over the crimped ring (C) and
thread the nut onto the ManaBloc supply port. Hand
tighten only. DO NOT OVER TIGHTEN.
4
*Zero Lead identifies Viega
of NSF 61-G through testing under NSF/ANSI 372 (0.25% or less
maximum weighted average lead content).
Use only supplied sealing element
Not for use with FostaPEX
®
products meeting the lead free requirements
1 of 2