Manuels Connexes pour Costway JV10852
Sommaire des Matières pour Costway JV10852
- Page 1 Bar Stool Tabouret de Bar JV10852 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Page 3 This should be easy, just follow our instructions. Estimated time for assembly 15:00 What you need • Use the packaging carton as a working surface to prevent product damage during assembly. • Phillips head screwdriver. Cela devrait être facile, suivez simplement nos instructions. Temps estimé...
- Page 4 What’s included/Ce qui est inclu Description/Description Qty/Qté Left Front/Right Back Legs with Floor Protector /Pieds Avant Gauche/Arrière Droite avec Protecteur de Sol Right Front/Left Back Legs with Floor Protector /Pieds Avant Droit/Arrière Gauche avec Protecteur de Sol Long Footrest/Repose-pieds Long Short Footrest/Repose-pieds Court Seat Cushion/Coussin de Siège 1/4"x60mm Hex Button Head Bolt...
- Page 5 The goods/Les biens IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools. IMPORTANT 1.Ne serrez pas complètement les boulons/vis jusqu'à...
- Page 6 Start with 2 of the same leg components. Match the lettered labels on the leg components with the lettered labels on the corner block. /Commencez avec 2 des mêmes composants de pied. Faites correspondre les étiquettes en lettres sur les composants des pattes avec les étiquettes en lettres sur le bloc d'angle.
- Page 7 Now add the third leg + 2 footrests (1 long + 1 short footrest). /Ajoutez maintenant le troisième pied + 2 repose-pieds (1 long + 1 repose-pieds court).
- Page 8 Time to add the fourth leg + 2 remaining footrests (1 long + 1 short footrest). Almost there! /Il est temps d'ajouter le quatrième pied + 2 repose-pieds restants (1 long + 1 court repose-pieds). Presque là ! Do NOT overtighten hardware. /Ne PAS trop serrer la quincaillerie.
- Page 9 Secure the foot rests with the screws (Part 4). Tighten only 75% for now. /Fixez les repose-pieds avec les vis (pièce 4). Serrez seulement 75% pour l'instant. Important Note: Screws are installed through the footrests into the legs at an angle. /Note Importante : Les vis sont installées à...
- Page 10 Last but not least, flip the stool over on a flat surface & make sure all legs are touching before tightening everything to 100%. /Enfin, retournez le tabouret sur une surface plane et assurez-vous que tous les pieds touchent le sol, puis serrez le tout à...
- Page 11 Return / Damage Claim Instructions DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted. Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement.
- Page 12 USA office: Fontana AUS office: Truganina GBR office: Ipswich FRA office: Saint Vigor d'Ymonville USA:cs.us@costway.com If you're having difficulty, our friendly AUS:cs.au@costway.com customer team is always here to help. GBR:cs.uk@costway.com FRA:cs.f r @costway.com...