Gorilla GREYBACK 47027 Manuel D'instructions Et De Sécurité page 11

All manuals and user guides at all-guides.com
The platform section and seat section are attached
with a tether.
DO NOT remove this tether because it is used
to keep the platform section attached to the seat
section in the event the platform section detaches
from your feet when ascending or descending
the tree.
DO NOT use the treestand if the tether is not
secured to both the platform and seat sections, or
if the tether is not adjusted to the recommended
length (see Section 5.1).
Detach the two D-ring snap pins from both of the adjustment arms
(FIGURE 5).
Remove one end of the tree cable assembly from either the left or
right side adjustment arm (FIGURE 6) (use which ever side is most
comfortable). On the other adjustment arm, line up the hole in the cable
end with the midpoint hole (FIGURE 7).
FIGURE 6
Insert the D-ring snap pin through the hole on the top of the adjustment
arm and through the hole in the cable end (FIGURE 8 and FIGURE 9).
FIGURE 5
FIGURE 7
Cable
assembly
Midpoint
hole
Adjustment
arm
11
Adjustment
arm