Electrohome EAAC302 Mode D'emploi page 18

If you experience a problem with this unit, check the chart below before
contacting us for service.
SYMPTOM
GENERAL
Power does not come on
RADIO
No Sound
Noise or sound distorted
on AM or FM
SYMPTOM
CLOCK
Incorrect Time
Alarm does not turn on
No display
1. disconnect the unit from any power sources before cleaning.
2. Keep the unit away from magnetic objects, water or heat sources.
3. use a clean soft, damp cloth moistened with lukewarm water to clean the
cabinet. Never use chemical cleaners that could damage the finish of the unit.
All manuals and user guides at all-guides.com
TROUBLESHOOTING
POSSIBLE CAUSE
AC cord not plugged in
Power is not on
vOLuME control at minimum
position
AM-interference from traffic
FM-antenna wire not extended Extend antenna wire
POSSIBLE CAUSE
Clock not set
battery is inserted incorrectly,
or depleted
Alarm is not set to turn on
Clock is not set
Alarm time is not set
dimmer is set to Standby Mode Press dimmer button
CARE AND MAINTENANCE
- 18 -
POSSIBLE SOLUTION
Insert plug firmly into AC outlet
Press the POWER ON/OFF
Turn the vOLuME control up
Turn the radio for better AM reception
POSSIBLE SOLUTION
Set the clock
Check/replace the battery
Press the button to set ALARM 1 ;
press the button to set ALARM 2
Set the clock
Set alarm time
button