Publicité
Les langues disponibles
Les langues disponibles
QUICK PROGRAMMING GUIDE 912-TP QPSK TO PAL DiSEqC
Program by
Channel
Channel
Frequency
Channel
21
Frequency
471.25
OSD Menu
Ensure that the OSD menu for adjusting the video and audio parameters appears in your mea-
Programs list
Audio list
Audio level
Output format
Apply
Subtitles list
Apply
Invert dual
Invert
Information
Read information
Code
Serial number
Set the programming switch of the 912-TP module to the OFF position. The programming
MHz
suring equipment or on your television screen.
9120129
17-456
indicator light will now go out.
Select the programming mode of the output of the
OK++OK
module: channel or frequency.
If you are programming the output by channel, you
Keypad + T
can either enter the channel using the numeric keypad
or
or select a channel from the pulldown list. Confi rm you
OK++OK+T
choice with OK, then press T to transmit.
If you are programming the output by frequency, enter
Keypad + T
the frequency using the numeric keypad. Then press T
to transmit.
Select the desired channel by pressing the T key on the
OK++T
arrows. The list will appear in the OSD menu. Then press
T to transmit.
Select the desired audio by pressing the T key on the
OK++T
arrows. The list will appear in the OSD menu. Then press
T to transmit.
Select the desired audio level by pressing the T key on the
OK++T
+ and - symbols. Then press T to transmit.
Select the
pan&scan 4:3; or full screen 16:9) by pressing the T
OK++T
key on the arrows. Set the parameter and exit from the
submenu by pressing T on the Apply button. Then press
T to transmit.
Select the desired subtitles by pressing the T key on the
OK++T
arrows; then confi rm your choice by pressing T on the
Apply button. Then press T to transmit.
Press T to transmit if you wish to invert the dual audio
OK+T
carriers. Then press T to transmit.
Press T to transmit if you wish to read the code and serial
T
number of the 912-TP transmodulator.
desired TV output format (letterbox 4:3;
ENG
Publicité
