EIBENSTOCK MXT 120/2 C Notice Originale page 11

Technical Data
Rührgerät MXT 120/2 C
Rated voltage:
Power input:
Rated current:
Frequency:
Rated speed:
Thread connection:
Max. basket diameter:
Weight:
Protection class:
Degree of protection:
Interference suppression:
Stirrer with stirring rod and operating instructions in a set cardboard box
Intended Use
The Stirrer MXT 120/2 C is designed for use in mixing paint, glue, tile
cement and other media in batches up to about 50 kg.
The diameter of the used stirring rods should not exceed 140 mm.
Safety Instructions
Safe work with the machine is only possible, if you read
these operating instructions completely and strictly
follow the instructions contained herein.
In addition, the general safety instructions in the
enclosed brochure have to be observed. Take part in a
practical introduction before the first use.
If the connection cable is getting damaged or cut during the
work, don't touch it, but instantly pull the plug out of the
socket. Never use the machine with damaged connection
cable.
The machine must neither be wet, nor be used in humid
ambient conditions.
Do not use the tool for mixing materials either in danger of explosion or
easily inflammable.
Supply
I
II
EN 55014 and EN 61000
11
230 V ~
1200 W
5,2 A
50 - 60 Hz
0 – 430 rpm
0 – 760 rpm
M 14 i
140 mm
about 5,2 kg
II
IP 20