Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
2. Note the positon of the vertical parts of the bracket on the
screen, and determine the position where the horizontal part of the
bracket has to attach to the wall.
3a. For a plasterboard and timber-studding wall, determine the
positions of the timber studding, and attach the horizontal part of
the bracket to the wall using the M8×50 mm woodscrews and plain
washers.
Use the built-in spirit-level to ensure that the bracket is level.
Ensure that the screws go into the timber studding, not just into the
plasterboard. Ensure that the bracket is fastened to at least two
studs.
DO NOT use plasterboard fixings - they will not support the weight
of the screen.
[ B ]
[ A ]
[ D ]
3b. For a masnory wall, mark the positions of the fixing holes as
shown. Use the built-in spirit-level to ensure that the bracket is
level.
Drill with a 10 mm masonry drill and fit the wall plugs.
Attach the horizontal part of the bracket to the wall using the M8×
50 mm woodscrews and plain washers as shown.
Page 4
Publicité
