Batteries
The battery compartment is on the bottom of the
inReach. Inside the battery compartment, you'll find a
label with your device's IMEI number and authorization
code; you'll need this when you activate your inReach at
explore.delorme.com.
To insert the batteries
Remove the cover, insert two AA batteries according to
the polarity symbols, and then replace the cover.
Lithium batteries provide the best performance and are
strongly recommended. Alkaline and NiMH batteries can
be used in an emergency. No other battery types are
supported.
Set up Your inReach Account
Create an account and activate the
inReach
Before you start using the inReach, you must set up an
account at explore.delorme.com. During the account
setup process, you will choose your inReach service plan
and add information about your emergency contacts.
Once you log in to your account, you should add your
contacts to the Address Book and customize the
predefined inReach messages in the Message Book so
you can better use the inReach in standalone mode.
Click the Help link at the top of explore.delorme.com for
help with using the website and to view printable user
manuals.
If you will be using the inReach with an Earthmate
PN-60w, see Using the inReach with a PN-60w for
information about syncing your account info with your
device. See the Help on explore.delorme.com for more
information.
Satellite Reception
The inReach needs a clear view of the sky to acquire a
GPS fix and transmit your messages over the Iridium
satellite network. This process should take less than one
minute, but it could take more time if the line of sight is
obstructed.
For the best reception when wearing the inReach, attach
it to a backpack strap on your upper body or place it in a
pocket at the top of a backpack. If you attach the pack
clip to your belt, some of the signal may be blocked by
your body and could prevent proper transmission of
messages and tracking points.
inReach Quick Start Guide
®
3