Publicité
Les langues disponibles
Les langues disponibles
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
CONNECTIONS
Mains input
Plug the power-plug into your safety socket.
The occupation of the power-cord (3 x 2.5 mm²) is as follows.
Brown
Blue
Green/Yellow
The earth has to be connected!
Please note: The power-plug is only allowed for a total current of up to 16 A. This is why the maximum
power output is restricted to 3,600 W.
Outputs
Output is via 10 safety power outlets. Connect your consumers via the safety power outlets. The maximum
current per channel is 10 A and the maximum current of 16 A must never be exceeded.
OPERATION
After you connected the device to the mains, the BOARD 10ST is ready for use. You can switch the desired
channel on and off via the switches on the frontpanel.
REPLACING A FUSE
If a fine-wire fuse of the BOARD 10ST fuses, do only replace the fuse by a fuse of same type and rating (F
10 A, 250 V fast).
Before replacing the fuse, disconnect from mains.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the defective fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
live (L)
neutral (N)
earth (E)
9
Publicité
