Comfort Glow QWH2100 Mode D'emploi page 6

INSTALLATION
Figure 1
Heater Hook Position
Figure 2
All manuals and user guides at all-guides.com
Step 1 (Figure 1)
DRY WALL: Using the screws and wall anchors
provided install into drywall as shown. Check to
insure screws are secure.
STUD WALL: Using the screws provided install into
drywall as shown. Check to insure screws are secure.
CONCRETE WALL: Drill ¼ inch holes, insert # 12 wall
anchors (not included) and secure to wall with #12 x 3
inch screws (not included). Check to insure screws are
secure.
Step 2 (Figure 2)
Hook the heater into position. Check to insure
that the mounting hook holes have securely
attached to the screws installed in step 1.
~ 6 ~