Comfort Glow QWH2100 Mode D'emploi page 10

5. Setting the POWER-ON-TIMER Function
(Note: The Power-ON-Timer Function will allow for the heater to power ON after a certain set time, and can
only be set while the heater's display is in the "Off" position.
Or
6. Setting electro lock
The Electro Lock can help avoid the heater from being accidentally engaged by children. The locking
mechanism can be set in both the ON and OFF modes.
And
And
All manuals and user guides at all-guides.com
The digital display changes from the "temperature" to the
"hours" option for the timer. Continue to press the timer
button to change the number of hours you would like the
heater to run before powering itself off .The hour options
for the timer are from 0 to 12 hrs. (in 1 hr increments).
The selected hour increments will flash for a few seconds,
then revert back to the set desired temperature .The
Timer indicator light will remain lit as long as the Timer is
set. The heater will power OFF when the internal heater
clock counts down the hour increments you set.
Turn the heater to the "OFF" position .Press the Timer
button on the heater's control panel or the remote.
The digital display shows the "hours" option for the timer.
Continue to press the timer button to change the number
of hours you would like the heater's internal clock to
count down before powering itself on .The hour options
for the timer are from 0 to 12 hrs. (in 1 hr increments).
The Timer indicator light will remain lit as long as the
Timer is set. The heater will power itself ON when the
internal heater clock counts down the hour increments
you set.
Press Temp Up and Temp Down buttons at the same time
for 3 seconds. Locking is complete when you hear a beep.
When locked, the functions of the control panel and
remote will be locked for use.
When you need to unlock it, press Temp Up and Temp
Down buttons at the same time for 3 seconds. You will
hear a beep .The control panel and remote control will
become functional again.
~ 10 ~