Publicité
Les langues disponibles
Les langues disponibles
The shipping carton for your painting system contains the following:
• Suction tube and return tube
• Pump cleaning adapter
• Spray gun with filter
• Spray tip assembly (see chart on next page)
• 25' (1420, 1620) or 50' (1720, 1920), 1/4" diameter pressure hose
ON/OFF Switch. . . . . . . . . . . The ON/OFF switch turns the power to the sprayer on and off (O=OFF, l=ON).
Suction tube . . . . . . . . . . . . . Fluid is drawn through the suction tube into the pump.
Fluid Section . . . . . . . . . . . . A piston in the fluid section moves up and down to create the suction that draws fluid through the
Spray Gun. . . . . . . . . . . . . . . The spray gun controls the delivery of the fluid being pumped. The gun model you have depends on
Spray Hose . . . . . . . . . . . . . . The spray hose connects the gun to the pump.
Return Tube . . . . . . . . . . . . . Fluid is sent back out through the return tube to the original container when PRIME/SPRAY knob is in
Pump Cleaning Adapter . . . The adapter allows you to attach a garden hose to the suction tube for easy cleanup (latex materials only).
PRIME/SPRAY Knob . . . . . . The PRIME/SPRAY knob directs fluid to the spray hose when set to SPRAY or the return tube when set
Pressure Control Dial . . . . . The pressure control dial regulates the amount of force the pump uses to push the fluid.
Oiler . . . . . . . . . . . . . . . . . . . . (1620, 1720, 1920 only) The oiler is designed to provide lubrication to the fluid section of the pump.
Pusher stem . . . . . . . . . . . . . The pusher stem is designed to keep the inlet valve open and from sticking due to dried materials.
Toolmate™ tool box. . . . . . . The Toolmate™ provides a place for spray gun and spray tip storage when they are not in use.
Capacity:
1420..........................Up to .25 gallon (0.95 liters) / minute
1620..........................Up to .29 gallon (1.10 liters) / minute
1720 .........................Up to .33 gallon (1.25 liters) / minute
1920..........................Up to .42 gallon (1.60 liters) / minute
Power source:
1420..........................1/2 Hp universal motor
1620..........................5/8 Hp universal motor
1720..........................3/4 Hp permanent magnet DC motor
1920 .........................7/8 Hp permanent magnet DC motor
Power requirement:
15 amp minimum circuit on 115 VAC, 60 Hz current
English
All manuals and user guides at all-guides.com
Components and Description
Controls and Functions
suction tube.
your sprayer model (refer to Spray Gun/Tip Chart, next page).
PRIME position.
to PRIME. The arrows on the PRIME/SPRAY knob shows the rotation directions for PRIME and SPRAY.
The PRIME/SPRAY knob is also used to relieve pressure built up in the spray hose (see Pressure
Relief Procedure, page 7).
Components
• Separating Oil
• Instruction manual
• Hose bracket (all cart units)
• Pail bracket (all cart units)
Specifications
Generator requirement:
8000 Watt
Safety features:
Spray gun trigger lock and pressure diffuser; built-in tip
safety guard; PRIME/SPRAY knob for safe pressure
release.
Capability:
Sprays a variety of paints, oil base latex, primers, stains,
preservatives and other nonabrasive materials, including
pesticides and liquid fertilizers.
This pump should not be used with textured
materials, block filler, or asphalt sealer.
4
Publicité
