SprayTECH Apex 2 Serie Manuel De L'utilisateur page 19

Follow these instructions only after all cleanup steps have been performed.
1. Fill a cup or other container with separating oil
(approximately 2 ounces) supplied with the unit and
submerge the inlet valve into the oil.
2. Place a rag over the spray hose port, and turn the switch
ON (l). When the oil has been sucked from the cup, turn
the pump OFF (O).
3. Wipe the entire unit, hose and gun with a damp cloth to
remove accumulated paint. Replace the high pressure
hose to the paint hose port.
If you have a cart model (1620, 1720, 1920), you can collapse the cart handle for easier storage.
1. Twist the knobs on either side
of the cart counterclockwise.
All manuals and user guides at all-guides.com
Long-Term Storage
Separating oil
19
2. Slide the handle into the cart.
English