Mutsy NEXO Mode D'emploi page 17

All manuals and user guides at all-guides.com
carseat and the pushbar to avoid the risk of head entrapment.
· Make sure the pushbar is not in lowest position
· Place the height limiters hard part (X1) on the inside of the pushbar
tube with the velcro facing inside.
· Strap the fabric around the pushbar and close the velcro.
Place the Maxi-Cosi car seat on the adapters
· Orientate the Maxi-Cosi car seat such that it is directed rearwards on
the frame.
· Hold the Maxi-Cosi car seat with the central hinge points of the sup-
port bar directly above the adapters.
· Lower the Maxi-Cosi car seat and press solidly into the adapters until
you hear a click. Check that the Maxi-Cosi car seat has been placed
horizontally and has been attached properly by trying to lift it from
the frame.
Remove the Maxi-Cosi car seat from the adapters
· Operate the unlocking system of the Maxi-Cosi car seat.
· Lift the Maxi-Cosi car seat straight up from the frame.
Remove the Maxi-Cosi adapters from the frame (z)
· Press the release button (z1) on the adapter. Turn the top of the adapter
outwards (z2) and take the adapter out of the cam from the top. (z3)
12