Sauder North Avenue 420042 Instructions De Montage page 3

Step 1
Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor.
å
NOTE: You should start each SCREW a few turns before completely tightening any of them.
å
Fasten the ENDS (B and C) to the UPPER SUPPORTS (D). Use four 1-3/8" ALLEN SCREWS (1) and the ALLEN
å
WRENCH (4).
Fasten the ENDS (B and C) to the LOWER SUPPORT (E). Use four 1/2" ALLEN SCREWS (3) and the ALLEN WRENCH (4).
å
NOTE: Be sure to square up the SUPPORTS (D and E) to the ENDS (B and C) before you completely tighten the SCREWS.
å
1-3/8" ALLEN SCREW
(4 used for the UPPER SUPPORTS)
4200042
1
D
D
B
www.sauder.com
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
These holes
must be here.
E
(4 used for the LOWER SUPPORT)
4
C
3
1/2" ALLEN SCREW
Page 3