Publicité
Les langues disponibles
Les langues disponibles
Store in a clean, dry place.
Use a soft, dry, clean cloth clean the Electronic Torque Adaptor and L.C.D panel.
Basic safety precautions should be observed especially when using the Electronic Torque
Adaptor on or near children and disabled persons.
Never submerge the Electronic Torque Adaptor in water or any other liquid.
Never clean the Electronic Torque Adaptor with organic solvents.
Use the Electronic Torque Adaptor only for the intended use described in this manual.
Do not exceed the permitted torque value for the Electronic Torque Adaptor.
Do not use the Electronic Torque Adaptor if it is not working properly, or if it has suffered
any damage.
Do not disassemble the Electronic Torque Adaptor.
Do not expose the Electronic Torque Adaptor to extreme temperature, humidity direct
sunlight or shock violently.
Do not shake or shock.
To ensure accurate measurement periodic reca
(11) Torque Range
If the torque range have changed and is not the same as in (02, 03, or 04) product
specifications, may be due to a weak battery.
The battery should be replaced in the case listed in the table.
Item#
Press the button "Mem" and hold them, replace the battery and press the
977
button "Mem" additional for 6 sec.
Press the button "+" and hold them, replace the battery and press the button
978
"+" additional for 6 sec.
Press the button "Power" and hold them, replace the battery and press the
979
button "Power" additional for 6 sec.
Now the original Range is set.
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Method
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Publicité
