Belkin YourType FOLIO Mode D'emploi page 3

All manuals and user guides at all-guides.com
To start, place your keyboard on the touch fasteners and your iPad
in the protective corners. Charge your keyboard by connecting the
USB cable to an appropriate USB power source (e.g. laptop, USB wall
charger, etc.) and the micro-USB to your keyboard. When the battery
is fully charged, the Status amber LED turns OFF.
Then pair it with your iPad. The Status LED light will flash blue while
the keyboard is not paired.
To initiate pairing between the keyboard and tablet, ensure they are
in close proximity:
For iPad:
Go to the Home screen on your iPad and tap on
1
"Settings > General > Bluetooth."
2
Turn Bluetooth to "On."
Turn on the keyboard and press and hold the "Pair" key.
3
The Status LED will flash blue on the keyboard and the keyboard
will show up under "Devices" on the tablet. Select "Belkin Bluetooth
Keyboard." NOTE: When pairing and charging simultaneously, the
amber charging light will remain on while the blue pairing light
flashes.
A code will appear on the iPad screen. Use the keyboard to enter
4
this code followed by the "Enter" key.
5
If, after 60 seconds, pairing fails, you will have to repeat the steps
above. You can view the status from the screen of the iPad.
After creating a paired link, you do not need to repeat the pairing
process; the keyboard automatically links to the tablet when both
devices are switched on. Pairing must be performed every time you
want to use the keyboard with a different tablet.
The keyboard is designed to prolong battery life and will enter
into battery-saving mode under prolonged inactivity. To wake the
keyboard, press any button. The Status LED will flash blue while
the connection is being reestablished, and will be solid blue for two
seconds when the connection is successfully established. The Status
LED then turns off during ongoing operation.