Publicité
Les langues disponibles
Les langues disponibles
Resetting the thermostat (default settings)
WARNING: All parameters, except the clock (time and day), return to
their default settings when the thermostat is reset.
Press the Mode button until Standby appears on the screen.
Press the
The thermostat will display rSt (reset) for 2 seconds to indicate it is
reset and will then return to normal display.
Power outage
During a power outage, the thermostat display remains lit for the first 2
minutes. During this time, the LP (low power) indicator appears and all
buttons are disabled. Then the screen turns blank. The settings are
stored in memory. After initial installation, the thermostat must be
connected to power for a minimum of two hours to enable the power
outage feature. When power returns, the thermostat returns to the
mode of operation preceding the power outage. If the power failure has
exceeded 5 hours, the clock and date must be re-adjusted.
button for 6 seconds.
15
TH105PLUS
Publicité
