Publicité
Les langues disponibles
Les langues disponibles
Made in Italy
EMC/2006/95/CE
Double element digital sensor (Digipyro™): 2
Double element digital sensor (Digipyro™): 2
Anti-disorentation articulation included
Anti-disorentation articulation included
Blocking screw
Blocking screw
Local alarm memory signallization escludible
Local alarm memory signallization escludible
"Pulse counter" function with automatic reset
"Pulse counter" function with automatic reset
"Pulse counter" function settable: 4
"Pulse counter" function settable: 4
Antiopening protection tamper
Antiopening protection tamper
High immunity RF: 30Vm
High immunity RF: 30Vm
Power supply voltage: 12Vcc ±10%
Power supply voltage: 12Vcc ±10%
Max current consumption: 10mA
Max current consumption: 10mA
Beams of the lens: 17 (su 3 livelli orizzontali) + 3 (su 1 livello verticale)
Beams of the lens: 17 (su 3 livelli orizzontali) + 3 (su 1 livello verticale)
Levels of the lens: 3
Levels of the lens: 3
Coverage angle (PIR): H: 120°; V: 60°
Coverage angle (PIR): H: 120°; V: 60°
Anti-masking lens
Anti-masking lens
(PIR): H: 85°; V: 60°
(PIR): H: 85°; V: 60°
Coverage: max. 15mt
Coverage: max. 15mt
Escludible signalling LED
Escludible signalling LED
Solid state relay outputs NC 100mA, 50Vcc max: 1
Solid state relay outputs NC 100mA, 50Vcc max: 1
Initial stabilizing time: 60"
Initial stabilizing time: 60"
Operating temperature: +5°C ÷ +40°C
Operating temperature: +5°C ÷ +40°C
Safety degree: 1
Safety degree: 1
Ambiental class: 2
Ambiental class: 2
Dimensions (L)x(A)X(H): 59x99x60
Dimensions (L)x(A)X(H): 59x99x60
Approved directives CEI EN 50131-1
Approved directives CEI EN 50131-1
The volumetric detector IRIS is provided with a circuitry achieved by a SMT technology in order to warrant more stability, during its employment, and more immunity
The volumetric detector IRIS is provided with a circuitry achieved by a SMT technology in order to warrant more stability, during its employment, and more immunity
from electromagnetic jamming.
from electromagnetic jamming.
Its sensibility regulation allows to install it in every place that needs a reasonable, safe and volumetric protection.
Its sensibility regulation allows to install it in every place that needs a reasonable, safe and volumetric protection.
Its "Alarm Memory" function, signalled by the incorporated LED, allows to find out which detector has caused the alarm, if there are other installed detectors in the
Its "Alarm Memory" function, signalled by the incorporated LED, allows to find out which detector has caused the alarm, if there are other installed detectors in the
same area, thanks to the "interrupted positive" (+12V Int.), that is a connection to the central to be done during the installation. This signalling is reset at every re-placement of
same area, thanks to the "interrupted positive" (+12V Int.), that is a connection to the central to be done during the installation. This signalling is reset at every re-placement of
the anti-theft kit.
the anti-theft kit.
INSTALLATION
INSTALLATION
Fix the bottom of the articulation to the wall after having pierced and applied the dowel. Make sure of having fixed it in a good way and that the wall surface is plane and not
Fix the bottom of the articulation to the wall after having pierced and applied the dowel. Make sure of having fixed it in a good way and that the wall surface is plane and not
subject to vibrations
subject to vibrations
.
.
Open the detector and fix the bottom into the articulation. Screw up the dowel after having oriented the detector
Open the detector and fix the bottom into the articulation. Screw up the dowel after having oriented the detector
NOTA:
NOTA:
Do not point it towards objects that could produce sudden changes of temperature, as central heating, radiators, air-conditioners, flames, etc.Avoid also its
Do not point it towards objects that could produce sudden changes of temperature, as central heating, radiators, air-conditioners, flames, etc.Avoid also its
installation near these ones.
installation near these ones.
Make the connections according the following scheme.
Make the connections according the following scheme.
Carry out the connections in accordance to the enclosed diagram:the terminal M can be connected to +INT of the antitheft control station if the alarm memory function
Carry out the connections in accordance to the enclosed diagram:the terminal M can be connected to +INT of the antitheft control station if the alarm memory function
enable is desired, otherwise leave it unconnected.
enable is desired, otherwise leave it unconnected.
WARNING:
WARNING:
Do not touch with finger the pyroelectric sensor!
Do not touch with finger the pyroelectric sensor!
PIR frontale
PIR frontale
Anti-sliding PIR
Anti-sliding PIR
All manuals and user guides at all-guides.com
Lead free
Lead free
Lead free
Lead free
Lead free
Lead free
Lead free
Lead free
Pb
Pb
Pb
Pb
Pb
Pb
Pb
Pb
Azienda con Sistema di
Azienda con Sistema di
Azienda con Sistema di
Azienda con Sistema di
Azienda con Sistema di
Azienda con Sistema di
Azienda con Sistema di
Azienda con Sistema di
gestione per la Qualità
gestione per la Qualità
gestione per la Qualità
gestione per la Qualità
gestione per la Qualità
gestione per la Qualità
gestione per la Qualità
gestione per la Qualità
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
UNI EN ISO 9001:2000
UNI EN ISO 9001:2000
UNI EN ISO 9001:2000
UNI EN ISO 9001:2000
UNI EN ISO 9001:2000
UNI EN ISO 9001:2000
UNI EN ISO 9001:2000
UNI EN ISO 9001:2000
compliant
compliant
compliant
compliant
compliant
compliant
compliant
compliant
12
12
mt
mt
3
3
6
6
2,2
2,2
mt
mt
3
3
6
6
Double passive infrared detector with field-of-view
Double passive infrared detector with field-of-view
15
15
15
15
IRIS2
IRIS2
3
3
Publicité
