GMC SandKat KAT150B Mode D'emploi page 11

Cleaning
• Keep your tool clean at all times. Dirt and dust will cause internal parts
to wear quickly, and shorten the machine's service life. Clean the body
of your machine with a soft brush, or dry cloth. If available, use clean,
dry, compressed air to blow through the ventilation holes
• Never use caustic agents to clean plastic parts
CAUTION: Water must never come into contact with the sander.
Hook and loop surfaces
• Hook and loop surfaces need to be clean, free of dirt and foreign matter, such as hair, ibres, sand etc.
• In order to provide adequate adhesion for securing accessories, hook
and loop surfaces must be in good condition
• When used extensively, hooks and loops will become elongated or
broken, and the mechanism cannot provide the required strength of
adhesion anymore
Note: This sander's hook and loop Sanding Base (4) is NOT a warranty
item. Replacement plates can be itted at an authorised GMC service
centre.
Storage
• Store this tool carefully in a secure, dry place, out of the reach of
children
Disposal
Always adhere to national regulations when disposing of power tools that
are no longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and electronic
equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on the
correct way to dispose of power tools
All manuals and user guides at all-guides.com
11
GB