RCA ViSYS 25110 Guide De L'utilisateur page 37

All manuals and user guides at all-guides.com
Dial tone is OK, but can't dial out
• Make sure the tone/pulse setting is programmed correctly.
Handset does not ring
• Make sure the ringer switch on the handset is turned ON.
• You may have too many extension phones on your line. Try unplugging some
phones.
• See solutions for "No dial tone."
VM indicator on the handset flashes
• Provided your phone company offers voice messaging service and you subscribe
to it, the VM indicator on the handset flashes when the phone is not in use to
indicate there is a message waiting. It stops flashing after the message has been
reviewed.
You experience static, noise, or fading in and out
• Handset or headset may be out of range. Move closer to the base.
• Relocate the base
• Charge the battery.
• Make sure the base is not plugged into an outlet with another household appliance.
Unit beeps
• See solutions for "No dial tone."
• Replace the battery.
Memory dialing
• Make sure you have correctly programmed the memory keys.
• Make sure to follow proper dialing sequence.
• Make sure the tone/pulse setting is programmed correctly.
• If you had a power outage or replaced the battery, reprogram the numbers into
memory.
Troubleshooting Tips