RCA ViSYS 25110 Guide De L'utilisateur page 30

Memory
Dialing a Stored Number
1. Make sure the handset or headset is ON (in TALK mode) by pressing the Talk or
Headset button on the handset or the Talk/Off button on the headset.
2. Press the Mem button.
3. Press the memory location button (01 through 50 records).
4. Press the Talk or Headset button on the handset. The number dials
automatically.
- OR -
1. Make sure the handset or headset is OFF (not in TALK mode).
2. Press Mem button.
3. Use the CID/Vol ( 5 or 6 ) buttons to scroll to the number you want to dial.
4. Press the Talk or Headset button on the handset. The number dials automatically.
Inserting a Pause in the Dialing Sequence of a Stored Number
When a pause is needed to wait for a dial tone, press the #Pause button twice
within one second (for example, when you must dial 9 for an outside line or to wait
for a computer access tone.) A pause in the dialing sequence shows in the display as
a P . Each pause counts as 1 digit in the dialing sequence.
Reviewing and Deleting Stored Numbers
1. Press the Mem button.
2. Use the CID/Vol ( 5 or 6 ) buttons to scroll to the number.
3. To delete the number, press the Mute/Del button. The display shows DELETE?
4. Press Mute/Del again to delete the number. DELETED shows in the display.
30
All manuals and user guides at all-guides.com