Publicité
Les langues disponibles
Les langues disponibles
(CA) DVD-C621 3/7/02 2:53 PM Page 10
Description-Front Panel
Front Panel Controls
STANDBY/ON
1.
• Use to turn your player on and off (standby).
2.
STANDBY LAMP
• When the unit is first plugged in, the indicator lights.
When power is pressed on, the lamp goes out.
EXCHANGE
3.
• Press this button when you want to change a disc
without stopping playback of the current disc.
DISC SKIP
4.
• Use to skip a disc in order.
HEADPHONES JACK
5.
• You can attach headphones here for private listening.
VOLUME LEVEL
6.
• Use to adjust headphones volume level.
Front Panel Display
Angle indicator. You can select multiple angles
1.
of a scene recorded by different cameras.
Disc type indicators
2.
Reverse play / Pause / Forward play
3.
Lights when 3D surround is turned on.
4.
DVD : Title number
5.
DVD : Chapter number.
6.
Video/Audio CD : Track number
7.
Repeat play mode
8.
Linear PCM audio output
9.
10
1
2
3
4
5
7.
DVD CHANGER(TRAY)
• Press OPEN/CLOSE to open and close the
disc changer.
FRONT DISPLAY
8.
• Operation indicators are displayed here.
PLAY/PAUSE
9.
• Begin or pause disc play.
10.
SKIP/SEARCH
• Use to skip or search a scene or music.
STOP
11.
• Stops disc play.
OPEN/CLOSE
12.
• Press to open and close the disc tray.
DISC SELECT
13.
• Use to select the desired disc loaded in the
DVD CHANGER.
Dolby Digital Disc
10.
DTS (Digital Theater System) output
11.
MP3 indicator
12.
MPEG-2 Audio output
13.
Displays various messages concerning
14.
operations such as PLAY, STOP, LOAD, ...
no DISC : No disc loaded.
OPEN
: The disc tray is open.
LOAD
: Player is loading disc information.
Description-Rear Panel
Rear Panel
DIGITAL AUDIO OUT JACKS
1.
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
2.
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3.
VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
4.
COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be
selected in the VIDEO OUT SELECT.
5.
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
6.
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
NOTE
• Select the VIDEO OUT SELECT switch in the STOP or Power off mode.
S-VIDEO
VIDEO OUT
SELECT
Y,Pb,Pr
11
Publicité
