XtremeMac TANGO TRX Guide De L'utilisateur page 10

LIstenIng to Your IPoD/IPhone through the
Dock connector
1.
2. If playing an iPod classic, touch or nano, insert the included
3. Carefully place your device into the dock connector.
4. Press the
5. Press the source button on the top of the unit or on the remote
6. Press play on the on the unit or on the remote. Use the controls
Note: The unit will charge your device while docked.
LIstenIng to Your DevIce wIreLessLY over
BLuetooth
To listen to your music over the Bluetooth wireless connection,
you need to pair your device with Tango TRX.
1.
2.
3.
4.
5.
6.
7.
Note: Once you have successfully paired your device with Tango TRX, you will not
need to repeat the above steps. For each use, ensure that the unit source is set to
Bluetooth and that Bluetooth is enabled on your device.
While there is an incoming call for the iPhone, the music will pause. After finishing
the call, the music will resume playing.
usIng the Xtrememac aPP
For enhanced functionality and control, download the Tango TRX
app. It will allow you to control volume, EQ settings, play/pause
and other iPod functions directly from your iPhone or iPod touch.
10
RX-13_user_guide_23950664E.indd 10
Controlled material extracted from Matrix on Nov 29, 2012 10:03:45 AM CST
All manuals and user guides at all-guides.com
If playing an iPhone, skip to the next step 3.
adapter into the two holes behind the dock connector and
press firmly to ensure a proper connection.
on the top of the unit or the remote to power on
Tango TRX.
until the iPod logo is illuminated as the source.
on the unit or the included remote to adjust the volume and
iPod functions.
Make sure your device has Bluetooth capability.
Press the on the top of the unit or the remote to power on
Tango TRX.
Follow the instructions listed in the manual of your device to
turn on the Bluetooth functionality to pair your device with
the unit.
Pair your device with the unit by selecting Tango TRX from
your Bluetooth listings on your device or selecting yes. If
prompted, enter 0000 as the passcode.
Press the source button on the top of the unit or the remote
until the LED under the Bluetooth logo is illuminated as
the source.
Press play on your device and use the control dial on the unit
or the remote to adjust the volume.
Use your device or the remote (for iPod/iPhone only) to control
music functions.
Imation Confidential - Use Only By Permission
8/15/11 10:11:3