Roadstar RU-260RC Manuel D'instructions page 6

- MODE BUTTON (9)
By pressing this key, user can select.
RADIO mode or USB-SD mode.
- BAND BUTTON (10)
Each band is toggled cyclically by pressing this key FM1---FM2---FM3.
- AUTOMATIC OR MANUAL TUNING (FREQ UP >> OR FREQ DOWN <<)
(A) RADIO MODE
When pressed short, these keys are operated as MANUAL tuning mode.
When pressed longer than 1 sec., they are operated as SEEK tuning mode.
(B) USB-SD/MP3 PLAYER MODE
When pressed short, they are operated as TRACK UP or TRACK DOWN mode.
- LCD DISPLAY (13)
The Liquid Crystal Display will display the current state of the unit.
- USB PORT (15)
- SD / MMC SLOT-IN (16)
Insert the SD/MMC card into the card slot. Playback starts automatically.
- PLAY/PAUSE BUTTON (7)
During "PLAY", press (17) 'PAUSE' button to "PAUSE". Press it again to resume play.
- INTRO BUTTON MP3 SCAN (18)
When this button is pressed, 'SCN' indication is displayed and the first several seconds
of each track of the disc are played. Press again to stop intro and listen to track.
- REPEAT BUTTON (19)
When this button is pressed, 'RPT' indication is displayed and play of the selected
track will be continually repeated until the Track repeat mode is cancelled by pressing
'RPT' button again.
- RANDOM BUTTON (20)
When this button is pressed, 'SHF' indication is displayed and each track of the disc
are played in random instead of normal progression. To cancel RANDOM mode, press
'SHF' button (20) again.
English 7
-
Press this button to move down throught the directory menu.
-
CLOCK SETTING
To set the clock, press the CLK (Clock Setting) button (22) for three seconds.
Move the Volume knob (3) to set the Hour, then press the SEL button (2) to switch to Minute
mode. Adjust the Volume to set the minute then press SEL button again to complete the
operation.
- ID3 Tag
If the MP3 file is available with ID3 TAG, pressing the display button repeatedly will show
information of the song.
SPECIFICATIONS
TUNER
Sensitivity
Stereo separation
Signal to noise radio
Frequency range
Channel step
Intermediate frequency
LINE-OUT
Output
Impedance
GENERAL
Power Supply
Speaker impedance
Output power
Note: Specifications and the design are subject to possible modification without notice due
to improvement.
8 English
DIRECTORY DOWN BUTTON (21)
CLOCK BUTTON (22)
Press this button to display the current time.
2 dBμ
35 dB
55 dB
87.5-108 MHz
50 kHz
10.7 MHz
350mV max.
10kOhm
13.8V DC
(10.8-15.6V allowable)
4 or 8 ohm
7,5 W RMS x 4CH