Publicité
Les langues disponibles
Les langues disponibles
USB Input
1.Supporting media and file format: Digital pictures (.JPG)
and digital music (.MP3) files
Due to differences in the file code and file mode, It is
possible that some files cannot be read.
2.Before starting operation, verify USB storage device
is of FAT32 and FAT file system format. At present, this
television does not support NTFS and the file systems
of other format.
3.External card reader supports most digital cards
available in the market. Readable digital cards are
classified according to the property of card readers and
can be connected to mobile hard disks (working voltage
5.0V, working current not over 500mA).
4.The television operation may be halted due to
excessive rate of information code errors. In such case,
restart the system. Please note - there are many
nonstandard USB mobile devices in the market. If a
nonstandard device is used then an identification
problem may occur.
To play pictures
1.Press USB button on the remote to enter stream media
system.
The system start up takes about 3 seconds. Then insert
the USB drive in the USB input.
2.Press
/
button to select Picture folder.
Press ENTER to enter.
3.Press
/
/ /
button to select desired picture, and
then press ENTER button to enter the play interface.
1
2
3
5
6
4
1.Play mode: None/Dissolve/Wipe right/Wipe left/Wipe up/Wipe down/Box in/Box out
2.Play time: Short/Medium/Long; 3.File name
5. Duration/Rotate
6.Effect7.Infomation
32 TV LCD-TFT
All manuals and user guides at all-guides.com
7
4.Pause/Play
4.Press the button on the remote control to select the
adjusted item, press ENTER button to confirm.
3
2
1
1.No available;
2.No available;
PLAY/PAUSE
STOP
REPEAT
3.No available;
4.No available;
REV
PREV
NEXT
5.No available;
6.Play previous picture;
7.Play next picture.
4
5
6
7
5
Press EXIT button to return to the previous menu.
.
Press USB button to exit the USB mode.
Note you may play the pictures among selected.
To play music
1.Press
/
button to select Music folder.
Press ENTER to enter.
2.Press
/
/ /
button to select desired music, and
then press ENTER button to enter the play interface.
3.Press the button on the remote control to select the
adjusted item, press ENTER button to confirm.
2
3
1
PLAY/PAUSE
STOP
REPEAT
REV
PREV
NEXT
7
4
5
6
4.Press EXIT button to return to the previous menu.
Press USB button to exit the USB mode.
Note You may play the music among selected.
Operation
1.Play or pause;
2.Stop;
3.Repeat
4.Fast reverse;
5.Fast forward;
6.Play previous music;
7.Play next music.
Publicité
